Fujikura specialty
welding equipment

Maunt offers an extensive range of specialty Fujikura fiber optic equipment. These devices are specifically designed for work in complex environments such as factories, production environments, laboratories and research institutions. Perfect for performing various welding operations with precision and reliability, these specialized welding devices are applicable in a variety of situations.

Fujikura specialty welding equipment

  • Fujikura welding equipment
  • Designed for complex environments
  • Innovative models
m10000589.jpg

FSM-100M

Designed for factory, manufacturing, laboratory and R&D applications.

The Fujikura fusion splicer FSM-100P is a powerhouse of technological advancement. Packed with advanced features for precise plasma zone control, LDF (Large Diameter Fiber) welding options and enhanced arc calibration. This unit takes welding to the next level with an enhanced sweep arc (to tapers fibers longer), a dynamic v-groove that adjusts.

m10000309.jpg

FSM-100P

Designed for factory, manufacturing, laboratory and R&D applications.

The Fujikura fusion splicer FSM-100M is a powerhouse of technological advancement. Packed with advanced features for precise plasma zone control, LDF (Large Diameter Fiber) welding options and enhanced arc calibration. This unit takes welding to the next level with an enhanced sweep arc (to tapers fibers longer), dynamic v-groove adjusting. The FSM-100P is also suitable for multicore fibers.

m10000590.jpg

FSM-100M+

Designed for factory, manufacturing, laboratory and R&D applications.

The Fujikura FSM-100M+ is an advanced fusion splicer with precise plasma zone control, LDF welding options and enhanced arc calibration. The device enhances welding with an optimized sweep arc for longer fiber tapering and a dynamic V-groove. It differentiates itself from the FSM-100M with the impressive EndView observation system, electrode rotation capability, larger cladding diameter and extended sweep length.

m10000415.jpg

FSM-100P+

Designed for factory, manufacturing, laboratory and R&D applications.

The Fujikura FSM-100P+ is an advanced fusion splicer with precise plasma zone control, LDF welding options and enhanced arc calibration. It takes welding to the next level with an optimized sweep arc, dynamic V-groove, impressive EndView observation system and electrode rotation capability. It is distinguished from the FSM-100P by a larger cladding diameter and extended sweep length. Also suitable for multicore fibers.

m10000591.jpg

LZM-100M

The Fujikura LZM-100M is suitable for splicing processing fibers up to 2.3 mm in diameter.

The LZM-100M is a system for glass processing and splicing that uses a CO2 laser heat source to perform splicing, adiabatic tapering (to create MFAs or pump combinations), lensing or other processing of glass with diameters of 2.3 mm or more.

m10000592.jpg

LZM-100P

The Fujikura LZM-100P is suitable for splicing processing fibers up to 2.3 mm in diameter.

The LZM-100P is a system for glass processing and splicing that uses a CO2 laser heat source to perform splicing, adiabatic tapering (to create MFAs or pump combinations), lensing or other processing of glass with diameters of 2.3 mm or more. The LZM-100P is also suitable for multicore fibers.

m10000593.jpg

LZM-125A+

The Fujikura LZM-125A+ is suitable for splicing processing fibers up to 2.0 mm in diameter or less.

The LZM-125A+ is a system for glass processing and splicing that uses a CO2 laser heat source to perform splicing, adiabatic tapering (to create MFAs), lensing or other processing of glass with diameters of 2.0 mm or less. A 360º theta rotary motion is available for the LZM-125A+ for PM fiber alignment.

m10000594.jpg

LZM-125M+

The Fujikura LZM-125M+ is suitable for splicing processing fibers up to 2.0 mm in diameter or less.

The LZM-125M+ is a system for glass processing and splicing that uses a CO2 laser heat source to perform splicing, adiabatic tapering (to create MFAs), lensing or other processing of glass with diameters of 2.0 mm or less.

m10000595.jpg

LZM-125P+

The Fujikura LZM-125M+ is suitable for splicing processing fibers up to 2.0 mm in diameter or less.

The LZM-125P+ is a system for glass processing and splicing that uses a CO2 laser heat source to perform splicing, adiabatic tapering (to create MFAs), lensing or other processing of glass with diameters of 2.0 mm or less. A 360º theta rotary motion is available for the LZM-125P+.

vincenctzwartwit.png
Need help? Vincent is happy to help you!

Vincent is responsible for commercial activities within the industrial market. He has extensive experience within this market and will particularly focus on the defense and security segment.

085 - 9026 600

Maunt's specialists are available weekdays from 8:30 a.m. to 5 p.m.